LiOA Water Heater – Models CT30 / CT50

  • Capacity: 30 L / 50 L

  • Rated Voltage: 220V ~ 50/60Hz

  • Rated Power Consumption: 2000 W

  • Maximum Operating Water Pressure: 0.8 MPa

  • Insulation Class: Class II

Make Order Request

Description

TECHNICAL SPECIFICATIONS

Model CT30

  • Capacity: 30 liters

  • Dimensions: 680 × 460 × 370 mm

Model CT50

  • Capacity: 50 liters

  • Dimensions: 1025 × 460 × 370 mm

General Specifications

  • Rated Voltage: 220V ~ 50/60Hz

  • Rated Power Consumption: 2000 W

  • Maximum Operating Water Pressure: 0.8 MPa

OUTSTANDING FEATURES

  • LiOA water heaters utilize an active anti-electric shock technology based on an isolation transformer. The transformer is integrated inside the plastic housing of the unit, completely isolating the heating element from the main power supply.
  • Thanks to the isolation transformer principle, the mains electricity does not directly contact the heating element. Therefore, even in the event of heating element failure, the water inside the tank is not electrified, ensuring maximum safety for users.
  • With this technology, LiOA water heaters do not depend on the building’s grounding system. Electrical safety is still guaranteed even in locations where grounding is unavailable or grounding quality cannot be controlled.
  • LiOA water heaters do not require an ELCB (Earth Leakage Circuit Breaker), as the isolation principle eliminates the risk of electric shock at the source, rather than only cutting power after leakage has occurred.
  • The tank design allows the heating power to be divided into two levels via a switch system, enabling users to select the appropriate heating mode according to actual usage conditions.
  • The product is equipped with a Winter–Summer switch, allowing operation with one or two heating elements to meet different hot water demands while also helping to save energy.
  • With this design, LiOA water heaters operate stably even in areas with unstable power supply or substandard wiring, by selecting a suitable heating mode.
  • The tank is fitted with a magnesium anode rod to reduce corrosion and limescale buildup inside the tank during long-term use.
  • The magnesium rod is installed externally, allowing users to easily inspect and replace it without complex technical procedures.
  • All LiOA water heaters are equipped with a water temperature display gauge, enabling users to monitor and control water temperature during operation.